 |
Telescope profiles are used for constructions of variable length, for adjusting the height or inclination of fixtures and equipment.
A Profile 6 30×30 must be used for the inside profile. The outside telescope profile can be connected directly to a profile groove on the end face or using fastening elements, such as the hinges, heavy duty. |
 |
 |
The inside profile, which is guided by a sliding bearing in the telescope, is secured with the Telescope Securing Set.
The Profile 6 30×30 must be 14mm shorter than the outside telescope profile in order for it to be inserted completely, and the stroke maximised. |
 |
| For design advice and technical data, contact Modular Components & Automation. |
